
COPY	IMAGE MODE TRANSFER PROGRAM

TO TRANSFER ENTIRE MAGTAPE, DECTAPE, DISK CARTRIDGE, OR DISK PACK TO
A LIKE DEVICE, TYPE THE FOLLOWING:

	# NEW DEVICE = OLD DEVICE/FC

WHERE NEW AND OLD ARE SAME TYPE DEVICE BUT DIFFERENT UNITS. FILE AND
AND ACCOUNT SPECIFICATIONS ARE PROHIBITED.

TO TRANSFER AND VERIFY, TYPE THE FOLLOWING:

	# NEW DEVICE = OLD DEVICE/FC/VE

TO VERIFY WITHOUT TRANSFERRING, TYPE THE FOLLOWING:

	# NEW DEVICE = OLD DEVICE/NC/VE

TO SPEED TRANSFER OR VERIFY OPERATION, USE /BL:N SWITCH AS FOLLOWS:

	# NEW DEVICE = OLD DEVICE/FC/BL:N

WHERE N IS AN INTEGRAL MULTIPLE OF 512. OLD DEVICE IS BUFFERED AT
N BYTES AND NEW DEVICE IS WRITTEN WITH BLOCK SIZE OF N BYTES.

TO SPECIFY OTHER THAN STANDARD DENSITY AND PARITY SETTINGS FOR
MAGTAPE, USE /DENSITY:D AND /PARITY:P WHERE
	D CAN BE:			P CAN BE:
	  200				  ODD
	  556				 EVEN
	  800			    PHASE-ENCODED
	  DUMP
	  1600
FOR EXAMPLE:

	#MT0:/DENSITY:556/PARITY:EVEN=MT1:/DENSITY:DUMP

ABBREVIATION OF SWITCHES IS NOT PERMITTED.

END OF COPY.TXT

